4-12
Using the Printer Software for Macintosh
Choose Page Setup fromtheFilemenuofyourapplication.The
Page Setup dialog box appears.
You can make the following settings in the Page Setup dialog box.
Defining a custom paper size
If the appropriate paper size is not included in the Paper Size list
in the Page Setup dialog box, follow the steps below to define a
custom paper size.
Paper Size Select the paper size you want to use. If you want
to define a custom paper size, see “Defining a
custom paper size” on page 4-12.
Orientation Select Portrait (tall) or Landscape (wide) to change
the orientation of your printout. If you need to print
close to the bottom of the page, select the Rotate
by 180 degrees check box.
Reduce or
Enlarge
Use this setting to reduce or enlarge the size of your
image from 25% to 400%.
Printable Area If you want to position your printout at equal
distances from the edges of the paper., select
Centered. If you need to increase the printable
area, select Maximum.
Note:
When Maximum is selected, the print quality may
decline at the edges of the printout. Before printing
large jobs using this setting, print a single sheet to
confirm quality.
When Maximum is selected, make sure the paper
loaded in the sheet feeder is not curled.