3. Make the following settings on the Main Settings tab.
❏ Document Source: Select the source where the original is placed.
❏ Scanning Side: Select the side of the original you want to scan when scanning from ADF.
❏ Document Size: Select the size of the original you placed.
❏ Image Type: Select the color for saving the scanned image.
❏ Resolution: Select the resolution.
4. Make other scan settings if necessary.
❏ You can preview the scanned image by clicking the Preview button. e preview window opens, and the
previewed image is displayed.
When you preview using the ADF, the original is ejected from the ADF. Place the ejected original again.
User's Guide
Scanning
104
To Next Page
Loading...
Need help?
General
