Layout:
Select how to layout the JPEG les. Borderless is for printing one le per sheet without margins around
the edges. e image is enlarged a little to remove borders from the edges of the paper. With B o rd e r is
for printing one le per sheet with margins around the edges. 20-up is for printing 20 les on one sheet.
Index is for making index printing with information.
Fit Frame:
Select On to crop the image to t into the selected print layout automatically. If the aspect ratio of the
image data and the paper size is
dierent,
the image is automatically enlarged or reduced so that the
short sides match the short sides of the paper. e long side of the image is cropped if it extends beyond
the long side of the paper. is feature may not work for panorama photos.
Quality:
Select Best for higher quality printing, but the printing speed may be slower.
Date:
Select the format of the date the photo was taken or saved. e date is not printed for some layouts.
Enhance:
Select this mode to improve the brightness, contrast, and saturation of the photo automatically. To turn
o automatic improvement, select Enhance O.
Fix Red-Eye:
Select On to automatically x the red-eye eect in photos. Corrections are not applied to the original
le, only to the printouts. Depending on the type of photo, parts of the image other than the eyes may
be corrected.
Clear All Settings:
Resets all settings to their defaults.
TIFF Settings
You can make print settings for TIFF format
les
in you memory devices.
:
Changes the order of the les.
(Paper Setting):
Specify the paper source settings which you want to print on.
Layout:
Select how to layout the Multi-TIFF
le.
Borderless is for printing one page per sheet without margins
around the edges. e image is enlarged a little to remove borders from the edges of the paper. With
Border is for printing one page per sheet with margins around the edges. 20-up is for printing 20 pages
on one sheet. Index is for making index printing with information.
User's Guide
Printing
60