❏ 1→1-Sided
Copies one side of an original onto a single side of paper.
❏ 1→2-Sided
Copies two single-sided originals onto both sides of a single sheet of paper. Select the orientation of
your original and the binding position of the paper.
(Density) :
Increase the level of density when the copying results are faint. Decrease the level of density when ink
smears.
Advanced Menu Options for Copying
Note:
e items may not be available depending on other settings you made.
Paper Setting:
Select paper size and paper type. If your printer has two paper cassettes, select the paper source that
you want to use.
Reduce/Enlarge:
Congures the magnication ratio of the enlargement or reduction. If you want to reduce or enlarge
the original by a specic percentage, tap the value, and then enter a percentage within a range of 25 to
400%.
❏ Actual Size
Copies at 100 % magnication.
❏ Auto Fit Page
Detects the scan area and automatically enlarges or reduces the original to
t
to the paper size you
selected. When there are white margins around the original, the white margins from the corner
mark of the scanner glass are detected as the scan area, but the margins at the opposite side may be
cropped.
❏ A4→A5 and others
Automatically enlarges or reduces the original to
t
to a
specic
paper size.
User's Guide
Copying
87
To Next Page
Loading...
Need help?
General
