5. When you hear a fax tone, tap
x
, and then hang up the handset.
Note:
When a number is dialed using the connected telephone, it takes longer to send a fax because the printer performs
scanning and sending simultaneously. While sending the fax, you cannot use the other features.
6. When sending is complete, remove the originals.
Related Information
& “Placing Originals” on page 49
& “Fax Settings” on page 128
Various Ways of Sending Faxes
Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
erefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
Tap Fax on the home screen, tap the Fax Settings tab, and then tap the Direct Send box to set this to On.
Related Information
& “Placing Originals” on page 49
& “Fax Settings” on page 128
Sending Faxes at a Specied Time (Send Fax Later)
You can set to send a fax at a specied time. Only monochrome faxes can be sent when the time to send is
specied.
1. Tap Fax on the home screen.
2. Specify the recipient.
3. Tap the Fax Settings tab.
4. Tap Send Fax Later, and then tap the Send Fax Later box to set this to On.
5. Tap the Ti me box, enter the time you want to send the fax, and then press OK.
6. Tap OK to apply the settings.
Note:
You cannot send another fax until the fax has been sent at the specied time. If you want to send another one, you need
to cancel the scheduled fax by tapping Fax on the home screen, and then deleting it.
User's Guide
Faxing
118
To Next Page
Loading...
Need help?
General
