5. Check the message, and then tap Print.
e network status sheet is printed.
6. Tap Close.
e screen automatically closes aer a specic length of time if you do not tap Close.
Replacing or Adding New Access Points
If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
& “Changing the Connection Method to a Computer” on page 38
Changing the Connection Method to a Computer
Using the installer and re-set up in a
dierent
connection method.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the soware disc (only for the models that come with a soware disc and users with computers
with disc drives.)
Insert the
soware
disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
User's Guide
Network Settings
38
To Next Page
Loading...
Need help?
General
