Epson WF-3721 User Manual

7. On the Distinctive Ring Detection (DRD) Setting screen, make the following settings.
❏ If you have subscribed to a distinctive ring service from your telephone company: Tap Settings , and then
select the ring pattern to be used for incoming faxes.
- If you select All, go to step 8.
- If you select any other setting, Receive Mode is automatically set to Auto. Go to step 10.
❏ If you do not need to set this option: Tap Skip, and then go to step 10.
Note:
❏ Distinctive ring services, oered by many telephone companies (the service name diers by company), allows you to
have several phone numbers on one phone line. Each number is assigned a dierent ring pattern. You can use one
number for voice calls and another for fax calls. Select the ring pattern assigned to fax calls in DRD.
❏ Depending on the region, On and O are displayed as the DRD options. Select On to use the distinctive ring feature.
8. On the Receive Mode Setting screen, select whether you are using your phone device connected to the printer.
❏ When connected: Tap Ye s , and then go to the next step.
❏ When not connected: Tap No, and then go to step 10. Receive Mode is set to Auto.
9. On the Receive Mode Setting screen, select whether you want to receive faxes automatically.
❏ To receive automatically : Tap Ye s . Receive Mode is set to Auto.
❏ To receive manually: Tap No. Receive Mode is set to Manual.
10. On the Proceed screen, check the settings you made, and then tap Proceed.
To correct or change settings, tap
.
11. Tap Start Checking to run the fax connection check, and when the screen prompts you to print the check
result, tap Print.
A report of the check result that shows the connection status is printed.
Note:
❏ If there are any errors reported, follow the instructions on the report to solve them.
❏ If the Select Line Type screen is displayed, select the line type.
- When you are connecting the printer to a PBX phone system or terminal adapter, select PBX.
- When you are connecting the printer to a standard phone line (PSTN), select Disable on the Conrmation screen
displayed. However, setting this to Disable may cause the printer to skip the
rst
digit of a fax number when dialing
and send the fax to the wrong number.
Related Information
& “Connecting the Printer to a Phone Line” on page 109
&
“Making Settings for a PBX Phone System” on page 114
&
“Setting Receive Mode” on page 120
& “Menu Options for Fax Settings” on page 130
Making Basic Fax Settings Individually
You can make fax settings without using the fax setting wizard by selecting each setting menu individually. e
settings congured using the wizard can also be changed. For more details, see the list of menus in fax settings.
User's Guide
Faxing
113

Epson WF-3721 Specifications

General

Brand	Epson
Model	WF-3721
Category	All in One Printer
Language	English