Split Page Settings:
Make split page settings when the size of the received document is larger than the size of the paper
loaded in the printer.
Auto Rotation:
Rotates faxes received as landscape-orientated, A5 size documents so that they are printed on the
correct paper size.
❏ For models with two or more paper sources:
is
setting is applied when the paper size setting for at least one paper source used for printing
faxes is set to A5. Check the paper source settings for printing faxes and paper size for the paper
sources in the following menus.
Settings > General Settings > Printer Settings > Paper Source Settings > Auto Select Settings
Settings > General Settings > Printer Settings > Paper Source Settings > Paper Setting
❏ For models with one paper source:
is
setting is applied when the paper size setting is set to A5. Check the following menu.
Settings > General Settings > Printer Settings > Paper Source Settings > Paper Setting
Add Reception Information:
Prints reception information in the header of the received fax, even if the sender does not set the
header information. e reception information includes the received date and time, sender's ID,
reception ID (such as " #001"), and page number (such as "P1"). When Split Page Settings is enabled,
the split page number is also included.
2-Sided:
You can print multiple pages of received documents on both sides of the paper.
Print Start Timing:
Select options to start printing the received documents.
All Pages Received:
Aer
receiving all of the pages, printing starts from the
rst
page.
First Page Received: Starts printing when the
rst
page is received, and then prints in order as the
pages are received. If the printer cannot start printing, such as when it is printing other jobs, the printer
starts printing received pages as a batch when it is available.
Collation Stack:
Prints received documents from the last page (print in descending order) so that the printed
documents are stacked in the correct page order. When the printer is running low on memory, this
feature may not be available.
Print Suspend Time:
Saves documents received during the specied time period in the printer's memory without printing
them. At the time
specied
to restart printing, the documents are automatically printed.
is
feature
can be used for noise prevention at night or to prevent
condential
documents from being disclosed
while you are away. Before using this feature, make sure there is enough free memory.
Quiet Mode:
Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
User's Guide
Faxing
132
To Next Page
Loading...
Need help?
General
