Erbe APC 300 - Changing Cylinder Data

5 • Changing Cylinders
4
First mark and program the pressure.
Then mark and program the volume.
The system will now automatically be rinsed with argon by the APC 300. If
the presure hose and pressure reducer are fitted tightly, no further hissing
noises should be audible!
Changing cylinder data
1. Call up the menu point Changing cylinder data.
2. Using the enter button, move the cursor onto the data to be changed. Modify
the data using the up / down buttons.
3. Press the enter button repeatedly to leave the menu.
200 bar = 2900 psi