Cleaning, Disinfecting, Sterilizing • 10
1
CHAPTER 10
Cleaning, Disinfecting and Sterilizing
Case of the APC 300 unit
Clean and disinfect the case of the unit using a spray or wipe disinfectant.
Follow to the instructions of the disinfectant manufacturer
Do not use any flammable or explosive substances. If this cannot be avoided,
they must have evaporated completely before the APC 300 and the
electrosurgical unit are switched on.
Make sure that no moisture penetrates the APC 300 during cleaning and
disinfection.
Pressure hoses and pressure reducers
Pressure hoses and pressure reducers must not be sterilized. A spray or wipe
disinfectant may be used.
Do not use any flammable or explosive substances. If this cannot be avoided,
they must have evaporated completely before the APC 300 and the HF surgical
unit are switched on.
Foot switches
Please read the respective instructions on their use.
APC applicators and probes
These accessories are continually being redesigned and developed. Please
read the respective instructions on their use.
WARNING!
WARNING!
To Next Page
Loading...
