Erbe APC 300 - Service and Warranty

Service and Warranty • 12
1
CHAPTER 12
Service and Warranty
Service
In order to prevent accidental injuries due to faults occurring in, or to
failures of the equipment or of any of its accessories, the equipment and
all of its accessories should be regularly checked for proper and safe
operation. These checks should be performed exclusively by personnel
whose knowledge, training and practical experience qualifies them to
perform such checks. A maintenance contract with ERBE is thus advisable
after the warranty period.
Warranty
The unit and accessories must be inspected immediately on receipt for
deficiencies and transport damage. Claims for compensation can only be
enforced when the seller or carrier are notified without delay. A damage report
must be compiled.
For warranty conditions ask your local dealer.
Claims under warranty are valid only when the warranty certificate has
been properly completed. The warranty covers free repair of the unit
provided that the deficiency has been caused by material or
manufacturing faults. Other claims, particularly claims for compensation
are excluded.
Repairs may only be performed by the equipment’s manufacturer or by
authorised service agents. Claims under warranty are invalidated if improper
modifications or repairs have been undertaken.
Repair work performed under warranty neither extends nor renews the
warranty.
Transport damage
Equipment warranty