Technical Data, Standard Parameters Programmed by ERBE • 13
1
CHAPTER 13
Technical Data, Standard Parameters Programmed by ERBE
Technical Data
APC 300 Typ No. 10132-010 Standard version
Supply voltage
100-230 V
50 / 60 Hz
Current input 0.3 A
Mains fuse T 1 A
Power consumption in Standby mode 20 watts
Power consumption at max. HF power 28 watts
Operating mode
Intermittent operation
ON time 25 %
(e.g. activated for 10 sec. / deactivated for 30 sec.)
Protective Class according to EN 60 601-1 I, CF
Classification according to EC Directive 93/42/EEC Class IIb
Potential equalization Yes
Cylinder connections 2 connections, 2 cylinders 5 l recommended
Input pressure of cylinder connections when gas
cylinders are connected
Minimum 2.5 bar (36.25 psi), maximum 4.5 bar (65.25 psi)
Maximum input pressure of cylinder connections
when central gas supply is connected
2.5 bar (36.25 psi)
Maximum cylinder pressure 200 bar (2900 psi)
Minimum purity of argon 99.998 %
Maximum gas flow rate
from 0.1 l/min to 9 l/min regulated argon flow with pressure
limitation
Modes of actuation Foot switch or finger switch
Automatic instrument identification Yes
Automatic flow setting Yes
Plain language error messages Yes
Size of APC 300
W x H x D 410 x 105 x 380 mm, W x H x D 16.1 x 4.1 x
14.9 inches
Weight of APC 300 6.8 kg
Size of equipment trolley 410 x 820 x 445 mm, 16.1 x 35.2 x 17.5 inches
Environmental conditions for shipping and storage
of the unit
Temperature -40°C to + 70°C
Air humidity, relative 10% to 95%
Environmental conditions for operation of the unit
Temperature +10°C to + 40°C
Air humidity, relative 30% to 75%, noncondensing
To Next Page
Loading...
