1-1
SECTION 1 WELCOME TO ESAB
1.1 HOW TO USE THIS MANUAL
To ensure safe operation, read the entire manual, including the section on safety instructions
and warnings.
Throughout this manual, the words WARNING, CAUTION, and NOTE may appear. Pay attention
to the information provided under these headings.
1.2 EQUIPMENT IDENTIFICATION
The unit's identification number (specification or part number), model, and serial number
usually appear on a data tag attached to the rear panel. Equipment which does not have a data
tag such as torch and cable assemblies are identified only by the specification or part number
printed on a loosely attached card or the shipping container. Record these numbers on this
book for future reference.
1.3
RECEIPT OF EQUIPMENT
When you receive the equipment, check it against the invoice to make sure it is complete and
inspect the equipment for possible damage due to shipping. If there is any damage, notify the
carrier immediately to file a claim.
1.4 DESCRIPTION
The ESAB EMP 285ic 1ph (230V or 120V) and the EMP 285ic 3ph (575V or 460V) are 50/60 Hz,
constant current welding machines capable of performing SMAW (STICK), and GTAW (LIFT TIG)
welding processes and constant voltage welding capable of performing GMAW (MIG) welding
processes. The unit is equipped with amperage and voltage meters which display on its User
Interface during welding. A host of other features display to satisfy the broad operating needs
of the user.
The ESAB EMP 285ic provides excellent welding performance across a broad range of
applications when used with the correct welding consumables and procedures. The following
instructions detail how to correctly and safely set up the machine and give guidelines on gaining
the best efficiency and quality from the Power Source. Please read these instructions
thoroughly before using the unit.
Additional copies of this manual may be purchased by contacting ESAB. Include the Owner's
Manual number and equipment identification numbers.
Electronic copies of this manual can also be downloaded at no charge in Acrobat PDF format by
going to the ESAB web site: http://www.esab.com.
To Next Page
Loading...
