SAFETY
2-8
3. Maintain cables, earthing wire, connections, power cord and power supply in safe
working order. Do not operate faulty equipment in a faulty condition.
4. Do not abuse any equipment or accessories. Keep equipment away from heat
sources such as furnaces, wet conditions such as water puddles, oil or grease,
corrosive atmospheres and inclement weather.
5. Keep all safety devices and cabinet covers in position and in good repair.
6. Use equipment only for its intended purpose. Do not modify it in any manner.
2.1.11 FALLING EQUIPMENT
Therefore:
1. Use equipment of adequate capacity to life and support unit.
2. Keep cables and cords away from moving vehicles and moving equipment when
working from an aerial location.
2.1.12 ARC RAYS
Therefore:
1. Protect your eyes and body. Use the correct welding darkening screen and filter
lens, and wear protective clothing
2. Protect bystanders with suitable screens or curtains
2.1.13 NOISE
Therefore:
1. Protect your ears. Use earmuffs or other hearing protection with the appropriate
level of noise reduction/hearing protection.
WARNING
Falling equipment can injure.
WARNING
Arc Rays can injure eyes and burn skin.
WARNING
Excessive noise can damage hearing.
To Next Page
Loading...
