INTRODUCTION
3-2
• 4-pin to 8-pin jumper
• USB stick including manuals
• Quick Start Guide
• Safety manual
3.2.2 EMP 285ic 3ph:
• ESAB EMP 285ic 3ph power source
• Tweco® Spray Master V350 MIG gun with 15 ft (4.5 m) cable, 0.030 in., 0.035
in., 0.045 in. (0.8 mm, 0.9 mm, 1.2 mm) contact tips and Allen key
• ESAB stick electrode holder, 12 ft (4 m), 300 A
• Ground clamp, 10 ft. (3 m), 300 A
• Victor® Flow Meter with 6 ft (2 m) gas hose
• ESAB OK AristoRod™ premium solid wire 0.035 in. (0.9 mm) 11# spool
• ESAB Atom Arc Acclaim 1/8 in. premium stick electrodes 1# sample pack
• Drive rollers: 0.035 in. (0.9 mm) to 0.045 mm (1.2 mm) V-Groove, 0.045 in. (1.2
mm) to 0.052 mm (1.4 mm) Knurled
• Guide tubes: 0.030 in. (0.8 mm) to 0.062 mm (1.6 mm) Solid Wire
• Thickness gauge tool
• 4-pin to 8-pin jumper
• USB stick including manuals
• Quick Start Guide
• Safety manual
3.3 OVERHEATING PROTECTION
The welding power source has overheating protection that operates if the internal temperature
becomes too high. When this occurs, the welding current is interrupted, and an overheating
symbol appears on the display. The overheating protection resets automatically when the
temperature has returned to normal working temperature.
CAUTION!
This unit is equipped with overheating protection for its power supply.
CAUTION!
This unit is equipped with overheating protection for its power supply.
To Next Page
Loading...
