ESAB EMP 285ic 3ph - Supply from Power Generators

INSTALLATION
5-7
Table 5-2. Recommended Electrical-Supply Specifications 3 ph, 50/60 Hz
Specification
Value
Supply ± 10%
460 V or 575 V
Input current at maximum output
18 A
Maximum recommended fuse* or circuit breaker rating
*Time delay fuse
16 A
Minimum recommended cord size
2.5 mm2 (13 AWG)
Maximum recommended extension cord length
15 m (50ft)
Minimum recommended grounding conductor size
2.5 mm2 (13 AWG)
5.6 SUPPLY FROM POWER GENERATORS
The power source can be supplied from different types of generators. However, some
generators may not provide sufficient power for the welding power source to operate correctly.
Generators with Automatic Voltage Regulation (AVR) or with equivalent or better type of
regulation, with rated power of at least 15 kW, is recommended.