SAFETY
2-2
meet the requirements that apply to this type of equipment. The following recommendations
should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well-acquainted with the operation of the
equipment. INCORRECT OPERATION OF THE EQUIPMENT MAY LEAD TO HAZARDOUS
SITUATIONS WHICH CAN RESULT IN INJURY TO THE OPERATOR AND DAMAGE TO THE
EQUIPMENT.
1. Anyone who uses the equipment must be familiar with:
• its operation
• location of emergency stops
• its function
• relevant safety precautions
• welding and cutting or other applicable operation of the equipment
2. The operator must ensure that:
• no unauthorized person is stationed within the working area of the equipment
when it is started up
• no-one is unprotected when the arc is struck, or work is started with the equipment
3. The workplace must:
• be suitable for the purpose
• be free from drafts
4. Personal safety equipment:
• Always wear recommended personal safety equipment, such as safety glasses,
flame-proof clothing, safety gloves
• Do not wear loose-fitting items, such as scarves, bracelets, rings, etc., which could
become trapped or cause burns
5. General precautions:
• Use side shields in any work area, even if welding helmets, face shields and/or
goggles are also required.
• Use a face shield fitted with the correct filter and cover plates to protect your eyes,
face, neck and ears from sparks and rays of the arc when operating or observing
operations. Warn bystanders not to look at the arc and not to expose themselves to
the rays of the electric-arc or hot metal.
• Wear flameproof gauntlet-type gloves, heavy long-sleeve shirt, cuff-less pants, high-
topped shoes, and a welding helmet or cap for personal protection. A flameproof
apron may also be desirable as additional protection against radiated heat and
sparks.
To Next Page
Loading...
