ESI A64v - Network Service Port Configuration; Web Server and RTP Port Settings

Page 28 of 66 0455-0323 Rev A
and the network address assigned by the DHCP server is the same as that of the LAN, then the
WAN will not be able to obtain IP access to the network
Network >> Service Port
This page provides the settings of webpage login protocol, protocol port and RTP port.
Parameter Description
Web server type
Restart after setting takes effect. Optional web login as HTTP/HTTPS
Web login timeout
The default is 15 minutes, the timeout will automatically log out of the
login page, and you need to log in again
Web page automatic
login
No need to enter the user name and password after the timeout, it will
automatically log in to the web page.
HTTP port
The default is 80, if you want security, you can set another port such as:
8080, web page login: HTTP://ip:8080
HTTPS port
The default is 443, same as HTTP port usage
RTP port start range The value range is 1025-65535. The value of rtp port starts from
the initial
value set. Each time a call is made, the value of the voice and video ports
is increased by 2
RTP port quantity Number of calls