Page 48 of 66 0455-0323 Rev A
To set the time manually, you need to disable the SNTP service first, and you need to fill in
and submit each item of year, month, day, hour and minute in the figure above to make the
manual settings successful.
Intercom settings>>Time plan
The user can set the time point and time period for the device to perform a certain action.
Enter a defined action name
Timing restart, timing upgrade, timing sound detection, timing
playback audio
Local: select the audio file uploaded locally
Select the audio file you want to play, it supports trial listening, and
you can play it immediately after clicking the trial listening
Do not repeat: execute once within the set time range.
Daily: Perform this operation in the same time frame every day.
Weekly: Do this in the time frame of the day of the week Mo
time frame of the month to perform this operation
Set the time period for execution
To Next Page
Loading...
