Page 30 of 66 0455-0323 Rev A
•
OpenVPN
To establish an OpenVPN connection, user should get the following authentication and configuration
files from the OpenVPN hosting provider and name them as the following,
OpenVPN Configuration file: client.ovpn CA Root Certification: ca.crt
Client Certification: client.crt
Client Key: client.key
User then uploads these files to the device in the web page [Network] -> [VPN], Section OpenVPN
Files. Then user should check “Enable VPN” and select “OpenVPN” in VPN Mode and click “Apply” to
enable OpenVPN connection. The connection will be re-established every time the device is rebooted,
or until user disables it manually.
Network >> Advanced
Network advanced Settings are typically configured by IT administrators to improve the quality of
device service.
Enable LLDP Enable or disable LLDP
Packet Interval LLDP Send detection cycle
Enable Learning Function Learn the discovered device information on the device
Pattern Voice quality assurance (off by default)
To Next Page
Loading...
Need help?
General
