Page 5 of 66 0455-0323 Rev A
Safety
Read the following safety notices before installing or using this unit. They are crucial for the safe and
reliable operation of the device.
•
Use a quality power supply or a PoE supply that meets PoE standards.
•
Verify that building power and wiring are good. Inaccurate power voltage or faulty wiring may
cause fire and damage.
•
Do not damaged cords or cables as they may cause fire or electric shock.
•
Do not handle the device roughly.
•
Do not install the device in places where there is direct sunlight. Also do not put the device on
carpets or cushions. It may cause overheating, fire or failure.
•
Before using the product, confirm that the temperature and humidity of the environment meet the
working requirements of the product. See datasheet.
•
Avoid getting the device wet.
•
Only allow a licensed access expert to install the device so that local code is met.
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft
cloth that has been slightly dampened in a mild soap and water solution.
•
Do not install the device in a poorly ventilated area.
•
Before installing any equipment, be familiar with building layout and electrical hazards.
Overview
Compatible with SIP and ONVIF protocols, the AC64v Access Device integrates access control,
intercom, and security protection. Featuring an aluminum alloy design and a lighted numeric keypad,
the AC64v delivers a high-quality robust appearance. The IP66 and IK07 ratings make the AC64v
water, dust and impact resistant in most outdoor environments. The AC64v allows users to make
audio/video calls via a speed-dial button and a 2 Mega-pixel camera and achieve access control by
different methods such as RFID and password. An array of input and output interfaces allows the
AC64v to be easily integrated with other security devices. The AC64v is ideal for apartments,
commercial buildings, communities, industrial parks and more.
To Next Page
Loading...
Need help?
General
