Page 49 of 66 0455-0323 Rev A
Intercom settings >> Tone
The user can configure the prompt tone of the device on this page.
You can select the country area or customize the area. The selected area can directly appear the
default information, and the customized one can modify the key tone, callback tone and other
information.
Intercom settings >> Led
The user can configure the status and color of the indicator light on this page.
Status indicator: The user can customize how the LED displays when the device is in different
status.
Energy-saving mode: The device automatically turns off the LED when the device is not in use. The
user can turn on or off the energy-saving mode.
Energy-saving mode timeout: The user can set the timeout of the energy-saving mode after
inactivity. The default timeout is 60 seconds.
To Next Page
Loading...
Need help?
General
