Eventide H9000 - 7.2. Dante

7.1. MADI
Supports full AES5 compatibility
Sample Rate Clock Sources: H9000 or the selected MADI RX Stream
32 In / 32 Out operation from 44.1kHz to 96kHz.
Optical, Coax or ExpressCard (RME proprietary) connections.
 Note
MADI coax requires 75 ohm cables, but is point-to-point only and does not allow daisy-chaining.
Thus, it does not require any external termination. Termination is done internally on both
transmitter and receiver ends. T-connectors should never be used.
7.1.1. Setup
These options are available in the Setup page for the MADI Card.
•
•
•
•
136
7. Expansion Cards
Copyright © 2021, Eventide Inc.