8-Channel Meters
These three-segment hardware meters display audio level information for the H9000 and are
active at all times.
Cursor Diamond
Use the four keys of the cursor diamond to navigate up, down, let and right.
Enter ()
Press the Enter (check mark) button to conrm or complete an action that you just set up.
Cancel (X)
Press the Cancel (X) button to cancel out of an action.
Jog Wheel
The large, weighted jog wheel is used to both navigate around the display, as well as to adjust a
currently highlighted setting. For example, if adjusting a room size parameter in a reverb
algorithm, you can spin the wheel to adjust the specic parameter value.
Mode Buttons
The H9000 has four dedicated Mode buttons that let you switch to any of the editing modes
with a single touch. The selected button illuminates to indicate the current mode.
Sessions
FX Chains
Algorithms
Parameters
Power
Press the latching power button to turn the H9000 on or o.
USB Ports
.
.
.
.
.
.
◦
◦
◦
◦
.
.
3. Hardware
Copyright © 2021, Eventide Inc.
To Next Page
Loading...
