evertz XRF6 - Upgrading Output Card Firmware; Figure 8-9: Version Information Menu Item; Figure 8-10: Active Radio Button

XRF6 RF Router Manual
FIRMWARE UPGRADES Revision 1.0 Page 8-5
8.1.3. Upgrading Output Card Firmware
1. Launch the VistaLINK
®
Pro client.
2. Select
Help → Version Information from the VistaLINK
®
toolbar.
Figure 8-9: Version Information Menu Item
3. Click the Active radio button.
Figure 8-10: Active Radio Button
4. Expand the entry for LBAND Router from the hardware tree at the left and select LBAND Output.