Loop function
• See section "Commands on Bottom Operational Block" on page 34.
Navigation
The Home shortcut behavior used from the Clip grid has changed: it displays the 4 first CAM of the first
bank of the current page and selects the first clip or clip angle.
• See section "The Clip Grid on LSM-VIA Viewer" on page 65.
Clip Management
2nd lever range function, PGM Speed, VarMax, Loop
The 2nd Lever, PGMSpeed and the VarMax functions are available to play the loaded clip in a different
speed range.
The Loop function is available to play the loaded clip in the configured Loop mode.
• See section "Browsing and Playing Clips" on page 123.
Operations on distant servers
Some operations need the Clip Edit by Network parameter to be set to Yes on the network server: edit,
move.
The following operations can be done on a network server even if that parameter has not been set to
Yes on that server: creating clips, copying clips, pushing clips, flagging clips for archive, exporting clips.
• See section "Managing Clips" on page 74.
• See section "Editing Clips" on page 108.
• See section "Transferring and Archiving Clips" on page 126.
• See section "Pushing Clips to Network Servers" on page 254.
Recue function
A shortcut is available to recue the loaded clip.
• See section "The Clip Grid on LSM-VIA Viewer" on page 65.
• See section "Loading Clips" on page 118.
Keyword management
The Keyword list is automatically updated when the keyword file is edited and saved. This file can be
stored locally or on another workstation of the network.
• See section "Adding Metadata to a Clip" on page 108.
VIII| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General