6.3.5.SearchingforClips
SearchingFunctions
Different Search functions are available to search for clips:
• The Search TCfunction is used to search for clips and/or trains from the Remote Panel.
Then, you may browse through the result list or through a media from the result list.
See section "Searching for Clips or Trains by Timecode" on page 85.
• The Quick Text Search function and the Advanced Search filters are used from the Search window of
the LSM-VIAViewer to filter the list of network clips based on any metadata.
Then, you can select multiple clips, load a clip, or insert clips into a playlist.
See section "Searching for Network Clips from the Search Window" on page 88.
SearchingforClipsorTrainsbyTimecode
Context of Use
When a train or a clip is loaded on the smallest controlled PGM, the Search TC function is available and
allows you to search for media containing a specific timecode on the whole network. The search can be
performed on clips only, trains only, or both clips and trains. The search is done on the last 24 hours.
Search results, if any, are sorted by increasing LSMID, with results from the local server listed first. The
first matching clip is loaded in pause on the smallest controlled PGM.
The number of results is displayed on the OSD: xx / yy, with xx = position of the loaded result and yy =
total number of results.
When the Browse mode is activated, you can use the jog to browse between the different results found.
Then, you can disengage the Browse mode to browse through the content of one of them.
How to Configure the Search TCFunction
1. From the Live screen, tap Search TCConfiguration.
The Search TC screen opens on the touchscreen.
USER MANUAL
LSM-VIA |6. Working with Clips| 85
To Next Page
Loading...
Need help?
General