3.2.SelectingtheControlledChannel
Introduction
When you have selected a channel control mode, all channels are controlled by default. However, you
can control one or more channels in either PGM+PRV or Multi-PGM mode depending on your needs.
This section explains the various control possibilities in each channel control mode:
• Channel Control in PGM+PRV Mode
• Channel Control in PGM-Only Mode
• Channel Control in PRV-Only Mode
• Channel Control in All PGM Mode
• Channel Control in Single PGM Mode
Channel Control in PGM+PRV Mode
How to Control PGM and PRV
• When you enter the PGM+PRV control mode, both PGM and PRV channels are controlled by default.
• When you are in PGM-only control, press the PGM key to take control on both PGM and PRV:
USER MANUAL
LSM-VIA |3. Defining Channel Control| 21
To Next Page
Loading...