EVS LSM-VIA - Selecting Playlist Elements

2. Type a name for the playlist.
It is entered in the Name field of the LSM-VIAViewer.
3. Select the playlist you want to name.
◦ click the playlist line in the Playlist grid
or
◦ press the arrow keys on your keyboard.
The playlist line is highlighted.
local:
remote:
4. Associate the name with the selected playlist by pressing .
If the playlist is displayed in the Playlist pane, or on the Remote Panel touchscreen, the name is
automatically updated.
7.3.5.SelectingPlaylistElements
Introduction
A single playlist element can be selected from the Playlist pane of the LSM-VIAViewer screen. It is then
highlighted as described in section "The Playlist Pane on the Viewer" on page 139.
A multiselection is possible as well. Then, the number of selected playlist elements is displayed at the
bottom of the Playlist pane.
USER MANUAL
LSM-VIA |7. Working with Playlists| 159