Display on Remote Panel with All PGMs Control
• The OSD displays FULL CTRL on all PGMs monitored.
• On the left operational block, all PGMs are displayed on a yellow background and the corresponding
PGM keys are steady red.
Channel Control in Single PGM Mode
How to Control a Single PGM
When you want to control a single PGM (PGM2, as illustrated below), press the key corresponding to
that PGM on the left operational block to gain the control of that PGM:
Display on Remote Panel with Single PGM Control
• The OSD displays FULL CTRL on the controlled PGM on the monitor, and NO CTRL on uncontrolled
PGMs.
• On the left operational block, the controlled PGM is displayed on a yellow background and the
corresponding PGM key is blinking red.
3.3.Multi-OperatorMode
Description
This feature allows up to 4 operators to work independently on the same server from their respective
LSM-VIA workstation and remote.
This mode has the following main characteristics:
• All operators share the clips and playlist pages.
• Each operator can define the configuration parameters for their own needs without interfering with
the other operators.
24| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General