4. Press .
The playlist element is cut in two parts that keep the same LSM ID.
7.4.8.EditingPlaylistElementSpeed
Default Value
By default, when an element is added to a playlist, the playlist element speed is set to 100%.
The default playlist element speed can be edited from the LSM-VIA configuration tool.
Afterwards, the playlist element speed can be individually edited from the Remote Panel or the Viewer
as described hereafter.
Limitation
When an audio split has been set on the transition before and/or after the playlist element, the Unknown
and the 0% speed values are not available from the lever.
How to Edit the Playlist Element Speed from the Remote Panel
To edit the speed of one or several playlist elements,
1. Load the playlist by pressing .
See also section "Loading a Playlist" on page 218.
182| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General