6.6.2.ArchivingaClip
Introduction
Clip angles can be flagged for archiving from the Viewer or from the console. This triggers the archiving
process of the clip angles by XFile3 thanks to a predefined autoarchive rule.
Prerequisite
XFile3 is available on the setup and an appropriate AutoArchive rule has been defined.
Limitation
With the current LSM-VIA version, the archiving can only be requested in CAMmode.
Flagging a Clip for Archive
How to Flag a Clip for Archive from the Remote Panel Console
The clip loaded on the smallest controlled PGM can be flagged for archiving as follows:
1. Load the clip angle to be archived on the smallest controlled PGM.
2. Flag the clip for archiving: .
How to Flag Clip(s) for Archive from LSM-VIAViewer
From the LSM-VIAViewer, you can request the archiving of any selected clip either from the Clip grid or
from the Search window.
1. Select the clip angle(s) to be archived.
2. Flag the clip(s) for archiving.
+
USER MANUAL
LSM-VIA |6. Working with Clips| 129
To Next Page
Loading...
Need help?
General