5.4.PlayingandBrowsingaRecordTrain
Live Mode
Whatever the enabled channel control mode (PGM+PRV or Multi-PGM), you are by default in live mode
(E/E mode). This means the record trains are being played on the various channels at 100% speed, at the
closest point to the live input.
PGMs Impacted
When you perform an action on the record trains, the action is performed on one or more channels
(PGMs) depending on the control mode and the controlled channels:
Mode Controlled PGM Action performed on ...
PGM + PRV PGM and PRV PGM+PRV
PGM + PRV PGM PGM
PGM + PRV PRV PRV in general
PGM for Play/Lever
Multi-PGM All PGMs All PGMs
Multi-PGM Single PGM Single PGM
Default Settings Values
• Freeze on Marks:
This parameter specifies whether Multicam will freeze or not when it reaches a mark point set on the
clip and/or the record train that is being played back.
By default, the playout does not freeze on the mark points when clips or record trains are being
played. This can be changed from the LSM-VIA configuration tool.
USER MANUAL
LSM-VIA |5. Working with Record Trains| 51
To Next Page
Loading...
Need help?
General