◦ Cam to copy the controlled CAMangles of the clip:
The screen shows the involved CAM:
5. Tap
◦ Short to copy the clip without its guardbands: .
or
◦ Long to copy the clip with its guardbands: .
6. Validate your action: press or tap .
The clip angles (Clip mode) or the controlled CAMangles (CAMmode) of the selected clip are copied to
the selected position.
In Clip mode:
• Pref Cams remain the same if they were selected for the Copy operation.
In CAMmode:
• Pref Cams remain the same if they were selected for the Copy operation.
• If only the secondary CAM(=) is selected, it becomes the principal pref cam (*), and the next
smallest cam becomes the secondary pref cam.
How to Move a Clip from the Remote Panel
1. Load a clip.
a. + +
102| January 2022 | Issue 1.4.G
To Next Page
Loading...