The screen shows the involved CAM:
5. Validate your action: press or tap
The clip angles (Clip mode) or the controlled CAMangles (CAMmode) of the selected clip are moved to
the selected position.
In Clip mode:
• Pref Cams remain the same if they were selected for the Move operation.
• If different clips are loaded on the different controlled PGMs, only the clip loaded on the smallest
controlled PGM is moved.
In CAMmode:
• Pref Cams remain the same if they were selected for the Move operation.
• If only the secondary CAM(=) is selected, it becomes the principal pref cam (*), and the next
smallest cam becomes the secondary pref cam.
How to Copy or Move a Clip from the LSM-VIAViewer
1. Select
◦ the Clip view to copy or move all the angles of a clip: or
or
◦ the CAMview to copy or move individual CAMangle: or .
2. Select the clip (Clip view) or the cam angle of the clip (CAMview) you want to copy or move.
See section "Selecting Clips" on page 80.
3. To copy the selected clip (Clip view) or the selected cam angle (CAMview), press + .
To move the selected clip (Clip view) or the selected cam angle (CAMview), press + .
The clipboard will reflect the copied clip ID.
4. Go to the empty position where you want to paste the clip (Clip view) or the cam angle (CAMview):
◦ use arrow keyboard shortcuts:
or
104| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General