On the right-side, the list of targets which have been defined in VIA Xsquare are displayed.
2. Select the target(s) to send the playlist to: .
You can still cancel the operation by tapping Cancel or by pressing the key which is
blinking red.
3. Tap or press .
The active playlist is sent to the selected target(s). The jobs are managed by VIA Xsquare.
How to Export a Local or Remote Playlist with a Shortcut Button/Key
See section "Commands from the Assignable Shortcut Keys" on page 37 to know how to map a VIA
Xsquare target to a Shortcut button/key.
This Shortcut button/key allows you to export the active playlist when a train or a playlist is loaded on
the smallest controlled PGM.
If a clip is loaded on the smallest controlled PGM, the Shortcut button will trigger the export of
the clip.
• Press the Shortcut key on the console or tap the Shortcut button on the touchscreen.
The active playlist is sent to the corresponding target. The job is managed by VIA Xsquare.
Various targets may have been assigned to different Shortcut buttons. So, you can use several Shortcut
buttons in a row to export the playlist to several targets.
USER MANUAL
LSM-VIA |7. Working with Playlists| 167
To Next Page
Loading...
Need help?
General