When a Fade video transition effect is selected, its color is black by default. This can be changed
from the LSM-VIA configuration tool.
• Video Transition Effect - Wipe Type
When a Wipe video transition effect is selected, its direction is, by default, from Left to Right. This
can be changed from the LSM-VIA configuration tool.
How to Edit a Transition Effect from the Remote Panel
To edit simultaneously the video and the audio transition effect, proceed as follows:
1. Load the playlist by pressing .
See also section "Loading a Playlist" on page 218.
2. Browse to the playlist element: .
The Playlist Edit mode is enabled.
See also section "Browsing a Playlist" on page 222.
3. Enter the Transition Effect mode by pressing .
4. Move the lever to select the transition effect.
The effects order from the bottom to the top is as follows.
As the audio transition effect is linked to the video transition effect, it is edited according to the
"Available Audio Transition Effects" on page 189 table.
5. (optional) Repeat steps 2 to 4 for other playlist elements.
6. Confirm the operation and exit the Transition Effect mode by pressing or by pressing
.
190| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General