EVS LSM-VIA

Adding an Auxiliary Clip from the Remote Panel
How to Add an Auxiliary Clip from the Remote Panel
1. Make sure you set the requested playlist as the active playlist.
See section "Adding Clips to a Playlist" on page 152.
2. Load a clip.
a. + +
b. +
c.
3. Set the clip as the AUXclip for the active playlist by pressing .
How to Remove an Auxiliary Clip from the Remote Panel
1. Make sure you set the requested playlist as the active playlist.
See section "Adding Clips to a Playlist" on page 152.
2. Load a clip set as the AUXclip for the active playlist.
a. + +
b. +
c.
3. Remove the AUXclip from the active playlist by pressing + .
216| January 2022 | Issue 1.4.G