EVS LSM-VIA

Writing Rules for a Clip LSM ID
• to load a clip in Clip mode, type the LSMIDwithout cam angle, e.g. 112.
The preferred clip angle will be loaded on the smallest PGMcontrolled by the first connected Remote
Panel, the secondary clip angle is loaded on the next PGM, ...
In case no Remote Panel is connected to LSM-VIA, the preferred clip angle will be loaded on the
smallest PGMof the server.
• to load a clip in CAM mode, type the LSMIDwith cam angle, e.g. 112C.
The clip angle will be loaded on the smallest PGMcontrolled by the first connected Remote Panel.
In case no Remote Panel is connected to LSM-VIA, the clip is loaded on the smallest PGMof the
server.
• to load a local clip: type the LSMIDwithout network number, e.g. 112 or 112C.
• to load a remote clip: type the LSMIDand the network number of a remote server, e.g. 112/9 (or
112/09) or 112C/9 (or 112C/09).
Writing Rules for a Playlist LSM ID
• to make a local playlist active: type the LSMIDwithout network number, e.g. 14.
• to make a remote playlist active: type the LSMIDand the network number of a remote server, e.g.
14/03 or 14/3.
This can be an empty playlist.
How to Recall a Train, Clip or Playlist from the LSM-VIAViewer
1. Make sure the focus is on the Clip grid, not on the Playlist pane.
2. Type the LSMIDof the record train, clip or playlist in the Name field of the LSM-VIAViewer:
.
3. Press to load the train or clip or to make the playlist active.
USER MANUAL
LSM-VIA |8. Operations on Network| 235