• Conditional: the playlist is loaded on a single PGM when the selected Channel Control mode is Multi
PGM controlling a single PGM. Otherwise, it is loaded in PGM+PRV.
See section "Loading a Playlist" on page 218.
PGM+PRV / Multi-PGM
The parameter is used to select the Channel Control mode.
It reflects the currently selected Channel Control mode.
See section "Selecting the Channel Control Mode" on page 19.
Mark Live / Playback
The parameter is used to determine how the mark points will be set.
• Live: mark points are set on all the record trains, at the LIVEinput timecode of the train loaded on the
smallest controlled PGM.
• Playback: mark points are set at the current timecode of the clip or the train loaded on the smallest
controlled PGM.
See sections "Managing Mark Points on Trains" on page 57 and "Managing Mark Points on Clips" on
page 105.
Specific Functions Buttons (4)
This area provides buttons giving quick access to specific functions.
From the current version, only the following buttons are available:
Add to Shotbox
This button is used to enter the Shotbox Edit mode.
The Add to Shotbox function allows users to quickly map the clip CAMangle loaded on the smallest
controlled PGM to a Shotbox button.
See section "Adding Media to the Shotbox" on page 248.
Edit Metadata
This button is used to enter the Metadata screen and to edit the metadata of the loaded clip.
See section "Adding Metadata to a Clip" on page 108.
Export Clip
This button is used to export clips to VIA Xsquare targets.
See section "Exporting Clips" on page 127.
Push
This button is used to enter the Push screen.
See section "Pushing Clips to Network Servers" on page 254.
64| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General