Operation
114
27891EN-900-02 / Edition 02/2017
12.5. ADJUSTING THE ROLLERS
Danger of destroying components:
It is possible to skip cleaning mode and start directly with adjustment.
› ALWAYS CLEAN the machine before adjustment.
› Scraper swiveled off or dismounted (knife guard mounted).
› Plastic guides dismounted.
› Select "Adjustment" .
During the adjustment process, a progress bar appears on the
display.
Fig. 90: Display during adjustment
Fig. 91: Adjustment finished, confirm with
c Adjusting the rollers (repeat
adjustment)
› After finishing, dismount cleaning guard.
› Confirm successful adjustment with .
The machine changes to routine operations.
A mounted cleaning guard automatically calls up the cleaning
menu, you do not access routine operations.
To Next Page
Loading...