Exakt 80E Plus + - Select Setup Via Menu Item Select Setting (in Routine Operations)

Operation
117
27891EN-900-02 / Edition 02/2017
12.6.2. SELECT SETUP VIA MENU ITEM SELECT SETTING
(IN ROUTINE OPERATIONS)
1. Select menu item Settings .
2. Select Setup .
Fig. 94: Select menu selection
Fig. 95: Select setup
3. Select working width with control dial (a) out of 85 / 170 und 200 mm.
4. Select temperature value with control dial (b).
Fig. 96: Setting working width and temperature
Fig. 97: Back in routine operations
b
g
a
g