Maintenance
128
27891EN-900-02 / Edition 02/2017
13 MAINTENANCE
EXAKT units are, if operated properly and checked for safety, very reliable and
low-maintenance.
To ensure this, the following service and maintenance works must be done in
the specified intervals according to maintenance plan.
EXAKT recommends annual maintenance by EXAKT or by a
dealer authorized by EXAKT.
Danger of scalding or burns at the media and at hot machine parts
when handling hot temperature control media.
› Let machine cool down before maintenance.
› Disconnect machine from the mains before performing
maintenance.
› Maintenance work must only be performed by persons who are
familiar with them, have been instructed about hazards and have
the required qualification.
Danger of cuts at the scraper knife.
› During assembly and handling, always work with plastic knife
protection or with knife protection for scraper socket.
› When working with the scraper socket and scraper knife, wear
suitable safety gloves.
To Next Page
Loading...