Operation
124
27891EN-900-02 / Edition 02/2017
12.9. REVERSE FUNCTION
In reversing mode, the rollers rotate backwards and foreign objects
or a product jam can be removed.
Danger of being pulled in by the rollers:
In reversing mode, gap 2 becomes the nip gap. Increased risk of
being pulled in because this gap is not covered by a safety device.
› When working at the machine, pay attention to your hands and
fingers.
› Ensure tight-fitting clothes.
12.9.1. SEQUENCE FROM THE CLEANING MODE
› Splash tray must be mounted.
› Cleaning guard is mounted.
1. On the display, select reversing .
2. Activate key switch (b) clockwise.
To Next Page
Loading...