Exakt 80E Plus + - Page 127

Operation
125
27891EN-900-02 / Edition 02/2017
Fig. 105: Select reversing
Fig. 106: Key switch must be switched
3. Unlock right latch of the cleaning guard (deactivate cleaning mode).
Fig. 107: Display: “Press start button reversing mode”
Fig. 108: Deactivating cleaning mode
4. Press start button reversing mode (a).
5. The rollers rotate in reverse at 30 rpm.
6. Remove foreign object out of nip gap (gap 1).
7. Lock key switch counter-clockwise. In that position, the key can be pulled off.
8. Select Back button .
9. Lock right latch of the cleaning guard.
10. Cleaning the rollers.