Performance specifications
19
27891EN-900-02 / Edition 02/2017
5.2. NO RELEASE FOR WORK IN POTENTIALLY
EXPLOSIVE ATMOSPHERE
Link back to chapter 3 Installation information in advance
The machine has not been designed for use in potentially explosive areas.
› Do not operate the machine in potentially explosive atmosphere.
› Do not process any potentially explosive products.
› Do not use explosive operating materials or cleaning agents.
5.3. REASONABLY FORESEEABLE MISUSE
This includes misuse.
It is prohibited
› To store installation materials, tools and other objects on the machine during
operation.
› To install spare parts or accessories not approved by the manufacturer.
› To bypass components or functions of functional safety.
› To dismount components of functional safety or to replace them by those not
approved by the manufacturer.
› To modify components.
› To operate the machine beyond the specified service life.
› To operate the machine in potentially explosive areas.
› To disregard safety data sheets.
5.4. QUALIFICATION OF THE PERSONNEL
Unqualified personnel cannot recognize the machine's behavior and thus any
risks arising from the machine; hence they are subject to increased hazard.
› Appoint a responsible machine operator. Only hand out keys and passwords
to the appointed personnel.
› Only sufficiently qualified personnel must perform the tasks described in these
operating instructions.
› Make sure that the personnel meet the local laws and regulations for safe
work.
To Next Page
Loading...