Installation information in advance
7
27891EN-900-02 / Edition 02/2017
3 INSTALLATION INFORMATION IN ADVANCE
The installation information in advance shall give you all information you need
for preparing you site before the machine is delivered to you. It gives information
how to handle and transport the machine, information for the setup site and
electrical connection / preparation, etc.
For this, the relevant chapters in this operating instructions are shown in the
table below:
We additionally recommend to read the entire operating
instructions before the machine is delivered to you.
Especially when
ordered option
(article-no.)
No release for work in potentially explosive
atmosphere
5.9.1 Type plate of the machine
9.4 Connecting the electric supply
9.4.3 Connection variant 2: fixed connection with
coded heavy duty connector
9.5 Connecting the roller temperature control
9.5.2 With pressureless cooling
9.5.3 With pressure cooling
To Next Page
Loading...