Table of Contents
4
27891EN-900-02 / Edition 02/2017
10.15. Mounting hopper for working width 200 mm 93
10.16. Mounting splash guards for working width 200 mm 94
10.17. Mounting splash guards for inner side paneling 95
10.18. Mounting the solvent dispenser for guide lubrication 96
11 Operating elements and operating unit 97
11.1. Main switch 97
11.2. Operating panel 98
11.3. Emergency stop button 99
11.4. Operating unit 100
11.4.1. Safety messages on the display 102
11.4.2. Overload messages on the display 104
11.5. Program structure 105
12 Operation 106
12.1. Switching on the machine 108
12.2. Cleaning the rollers 110
12.2.1. Pre-cleaning the rollers 110
12.2.2. Preparing for cleaning 110
12.2.3. Cleaning roller 1 112
12.2.4. Cleaning roller 2 and roller 3 112
12.3. Cleaning the scraper system 113
12.4. Temperature control of the rollers 113
12.5. Adjusting the rollers 114
12.6. Defining the pre-settings (setup) 115
12.6.1. Setup after every adjustment and before each programming 116
12.6.2. Select setup via menu item Select setting (in routine
operations) 117
12.7. Routine operations 119
12.8. Routine operations: Test run with petroleum jelly 121
12.8.1. Step 1 121
12.8.2. Step 2 121
12.8.3. Optimum product flow 122
12.9. Reverse function 124
12.9.1. Sequence from the cleaning mode 124
12.9.2. Sequence from routine operations 126
12.10. Checking the safety devices 127
12.10.1. Preparing for check 127
12.10.2. Checks functions 127
To Next Page
Loading...