Installation
59
27891EN-900-02 / Edition 02/2017
› Select a location with sufficient room at all sides for operation and cleaning
› Distance to the walls at least 300mm to the left and right of the machine.
Distance to the walls at the backside at least 30mm
› Set up on flat and slip-free surface
› Lab table with a bearing capacity of at least 150kg
› The setup site must meet the specifications given in the safety data sheets of
the substances to be processed, especially when working with highly volatile
solvents.
› Lift machine only with the original load handling equipment provided by
EXAKT.
› After installation, dismount load handling equipment and store safely.
Danger to life and limb
Danger of crushing
Impacts
Tripping
› Only use functional lifting gear.
› Make sure that no persons are within the danger zone.
› Do not step under or stand under suspended load.
› Wear protective footwear, protective gloves and head protection.
Danger of damaging the rollers:
› Do not drop heavy objects onto the rollers.
› Protect rollers from damage by sufficient padding.
To Next Page
Loading...