S2000 Elite - User's Guide
035-00707 Revision 1
103
13.2. Software Update via WEB UI
The S2000 Elite's System Software and Web Software can be remotely upgraded using the
Web UI.
Materials Required
1. S2000 Elite System with reliable power source and network connectivity
2. Computer or mobile device with one of the supported browsers: Google Chrome or
Microsoft Edge
3. S2000 Elite System host name or IP address
4. Software file(s) saved on your device OR a correctly prepared SD Card (refer to
Software Update via S2000 Elite Touchscreen on how to prepare an SD card for
upgrade(s))
Your device must be connected on the same network as the S2000 Elite.
You can determine the network properties of your S2000 Elite system by navigating
to the Network Setup screen using the touchscreen. Record your IP address or host
name (DNS).
Upgrading the System Software is estimated to take 3 minutes.
Software Upgrade Page
1. Software Upgrade HTML
page
2. LOAD button for selecting a
local .EES file from your
device and upgrade via
Network
3. List of all Software Upgrade
and Web Upgrade files
located on the SD card
4. Selected SD card file for
upgrade
5. Start Upgrade button
To Next Page
Loading...